BioClass HC
16
Technical icon:
It is displayed when any of the boiler's technical parameter on the
"Technical Menu"
or
"Setup menu"
is displaying or modifying.
H
Auxiliary icons.
Value or setting related to a temperature is shown by the numerical digits.
bar
Value or setting related to the boiler water pressure is shown by the numerical digits.
I
Operating mode icons:
It is displayed when the direct heating circuit nº 1 demand is activated or when a value or
setting related to this circuit is shown by the numerical digits.
It is displayed when the direct heating circuit nº 2 demand is activated or when a value or
setting related to this circuit is shown by the numerical digits.
It is displayed when any value or setting related to the boiler and/or the burner is shown
by the numerical digits.
It is displayed when a value or setting related to boiler's fan is shown by the numerical
digits.
It is displayed when a value or setting related to weight, calibration, fuel consumption, etc.
is shown by the numerical digits.
It is displayed when a value or setting related to the Fuel suction system is shown by the
numerical digits.
It is displayed when a value or setting related to the burner's ash cleaning system or
boiler's ashtray (either manual or compressor) is shown by the numerical digits.
It is displayed when a value or setting related to the ashtray overflowing is shown by the
numerical digits.
It is displayed when the feed auger is switched on and it is displayed blinking when it is in
manual operation mode.
It is displayed when any of the
“Menu”
is in browse mode.
SET
It is displayed when the parameter shown by the numerical digits is adjustable and it is
displayed blinking when the parameter is in adjustment mode.
