background image

Avanttia 

 

26 

18

 

COMMERCIAL GUARANTEE 

DOMUSA TEKNIK’s commercial guarantee

(*) covers the standard functioning of the products 

manufactured by DOMUSA TEKNIK Calefacción S.Coop., in accordance with the following conditions 

and time periods: 

1. This 

commercial guarantee

 is valid for the following periods, as from the 

start-up 

date: 

2 Years 

for electric and hydraulic elements: pumps, valves, etc. 

5 Years 

for heat exchangers. 

5 Years

 for domestic hot water tanks. 

During the 2-year period following the start-up date, DOMUSA TEKNIK will carry out any repairs of 

original flaws or defects totally free of charge. 

After these 2 years have elapsed and until the end of the guarantee period, labour costs and call-

out charges will be payable by the user. 

2. The annual overhaul is not included in the terms of this guarantee. 

3. The 

start-up

 and 

annual overhaul

 are to be carried out by personnel authorised by DOMUSA 

TEKNIK.

 

4. The 

commercial guarantee

 will be null and void in the following cases: 

- If the annual overhaul by personnel authorised by DOMUSA TEKNIK has not been carried out. 

- La caldera no haya sido instalada respetando las leyes y reglamentos vigentes en la materia. 

- If the boiler has not been installed in accordance with the applicable laws and regulations for this 

type of appliance. 

- If the boiler has not been started up immediately after its installation, by personnel authorised by 

DOMUSA TEKNIK. 

Failures due to misuse or incorrect installation, use of non-suitable electrical power or fuel, supply with 

water with physical or chemical properties causing incrustation or corrosion, incorrect handling of the 

appliance and, in general, for any reason beyond DOMUSA TEKNIK’s control, are excluded from this 

guarantee. 

This guarantee does not affect the consumer’s rights as stipulated by law. 

Note: Start-up is included in the price of the boiler. 

The call-out charge is not included.

 

Summary of Contents for AVANTTIA HDX

































Reviews: