69
4.5.5 Programme editing
With the dryer switched on and without running any programmes, press the PROG key three
times. The microprocessor will request a password (Code).
To access the user menu you must enter code 1-3-5-7. Use keys INC (
) and DEC (
)
to change the digits and with the SELECT key you can go from one digit to another. When
the four figures have been entered, press SELECT to go to the User menu.
When SELECT is pressed, the user menu appears in the window as shown
below.
TYPE MENU
COUNT
EDIT
EXIT
Place the cursor over EDIT, and press SELECT to go to the EDIT menu.
TYPE MENU
OPTION
COUNT
EDIT
EXIT
PASSWORD
* * * *
PASSWORD
1-3-5-7
