Doms PSS 5000 Technical Manual Download Page 34

Page: 34 / 155

34 of 155

PSS5000/TEMA/803046/14

PSS 5000 – Technical Manual

4 Information (Menu 1)

4.4

Protocols (Menu 1.4)

To view available
protocols with web
service pages

This procedure describes how to use the Service Menu in the web browser to
view the protocols that are supported and can be assigned.

Select

1 Information



1.4 Protocols

The

Protocols

page appears.

Use the information on this page to see a list of supported protocols.

4.5

LAM (Menu 1.5)

To view all the constants
for the current LAM

This procedure describes how to use the Service Menu in the web browser to
view all the constants set by the current LAM.

Select

1 Information



1.5 LAM

The

LAM Information

page appears.

Use the scroll bar to view all the constants, and their values, set by the cur-
rent LAM.

Summary of Contents for PSS 5000




























































































































































Search results

Summary of Contents for PSS 5000

Reviews:

Brands by name

Popular brands

Doms PSS 5000, Technical Manual

Search results

Summary of Contents for PSS 5000

Reviews:

Brands by name

Popular brands