PSS5000/TEMA/803046/14
133 of 155
PSS 5000 – Technical Manual
B Web Service Connections
2.
Click
Properties
.
The
<
connection name
> Properties
window appears. This window has 5
tabs:
•
General
•
Options
•
Security
•
Networking
•
Advanced
3.
On the
General
tab, open the
Select a device
drop-down list and select
Com-
munications cable between two computers (COM1)
if it is not already in the
field.
4.
Click
Configure
.
The
Modem Configuration
window appears.
5.
Set up the parameters as shown below:
•
Maximum speed (bps): 38400
•
Clear all check boxes
6.
Click
OK
.
7.
Select the
Networking
tab and set the following parameters:
•
Type of dial-up server I am calling, :
PPP: Windows ...
•
Select
Internet Protocol (TCP/IP)
check box
•
Clear all remaining check boxes
8.
Click
OK
.
The connection is now configured correctly to communicate with PSS
5000 and the
Connect <connection name>
window appears.
9.
Type in a user name (
admin
) and password (
password
) for the PSS 5000
and click
Connect
.
The PC now uses the null modem cable and the connection configured
above to connect to the PSS 5000.
