Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 6-24
6.3 SDI Video
The SDI video outputs on the rear panel can be configured for 12G/6G/3G-SDI signals.
Go to the
Config>Video
page to configure the
Decoder
.
The
Pattern
Generator
can be used to test the video through to the output stage of the system prior
to receiving a live transmission.
Click
Apply
to activate a running config and
Save
to retain.
Go to the
Config>SDI
page and configure the SDI output, these settings will depend on how the
outputs will be viewed. If using the SFP port, an SFP adaptor must be fitted.
Set the
Source
to
Pattern
if testing the received video, or
Decoder
to view live video.
Click
Apply
to activate a running config and
Save
to retain.
