Domo DBS Nano PRO TX User Manual Download Page 7

Page: 7 / 49

Revision: 1.0

DBS Nano PRO Transmitter User Guide

Commercial in Confidence

Page 2-2

Product Package

2.1

Overview

Carefully open the packaging and verify that all the parts have been included, as ordered. Retain the
packing materials for storage.

The part numbers are useful for identification and if you need to order a new part. The part number
codes mean:



– cable assembly



– sub assembly



– assembly part

Note

: If you do not have all the parts or are not happy with the condition of your delivered product,

please contact DTC. See

Section 8.2

2.2

Parts List

These items will be in the package.

Part Number

Description

Primary Unit

DBS Nano PRO Transmitter (see variants

Section 2.5

)

CAB0008

XLR analogue audio cable

CAB0009

Power and control cable

2.3

Accessory Options

If you have purchased any of these items, they will also be in the package.

Part Number

Description

BAMP-1W-200250

Barrel Booster Amplifier 1W 2.00-2.50GHz

BAMP-1W-320360

Barrel Booster Amplifier 1W 3.20-3.60GHz

BAMP-1W-440500

Barrel Booster Amplifier 1W 4.40-5.00GHz

BAMP-1W-550600

Barrel Booster Amplifier 1W 5.50-6.00GHz

BAMP-1W-640700

Barrel Booster Amplifier 1W 6.40-7.00GHz

BAMP-1W-700750

Barrel Booster Amplifier 1W 7.00-7.50GHz

BRK-NPRO-NTYPE

Nano PRO antenna adapter bracket

BRK-NPRO-VLAB-AB

Nano PRO AB-mount clamshell

BRK-NPRO-VLAB-V

Nano PRO V-mount clamshell

Summary of Contents for DBS Nano PRO TX


















































Search results

Summary of Contents for DBS Nano PRO TX

Reviews:

Domo DBS Nano PRO TX, User Manual, Page: 7 / 49

Search results

Summary of Contents for DBS Nano PRO TX

Reviews: