manualshive.com logo in svg

Domino V100, Operation And Maintenance Manual

Share
Download
Domino V100 Operation And Maintenance Manual Download Page 83

OPERATION 

MAIN MENU 

4 Issue 1January 2008 

 

(83) 

The main menu is displayed when an authorized user is logged in. 

 

Printing 

ows access to the printer memory. In other words, if layouts have already 

lected and 

See page no. 84. 

 

outs.  

ptimise the 

 number of ways. Through this menu, the user may correct 

and edit the V200’s basic configuration. 

on with peripheral equipment such as packing machines or labelling 

 pre 

 when 

(4)  Security 

Use this button to log out. This is a common function for multi-user systems. Once 
logged out, the user must type in a user name and the corresponding password to log 

in again. Using the “SETTINGS” menu described on page no.60, the administrator 
can set up different users and their passwords. 

1 

2 

3 

4 

(1)  Start 

This menu all

been designed and stored on the accompanying flashcard, these can be se
opened here.   

The user should not use this menu to edit the stored designs; this is done using the 

“DESIGN” menu described below. 

(2)  Design

This menu allows the user to edit existing layouts, and to create new lay
Read more about this menu on page no. 88. 

(3)  Settings 

This menu is mainly used when installing the printer and it is used to o

printer’s performance in a

Communicati
units is also administered via this menu. Many of the V200’s functions are
configured by the manufacturer, therefore the user should exercise caution

making changes in this menu. 

2786

Summary of Contents for V100




































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands