Domino Gx-OEM Product Manual Download Page 175

Page: 175 / 198

6. Select the

Copy

Move

icon.

7. On the right side of the screen, navigate to and open the

USB

folder.

8. Open the

sda1

sdb1

folder.

Notes

"sda1" and "sdb1" are the top level partitions of USB memory devices that

are connected to the controller.

2. "sda1" is the first USB memory device that was connected. "sdb1" is the

second USB memory device that was connected.

9. Select the

Move/Paste

icon.

10. Remove the USB memory device from the controller.

End of procedure.

Delete Label

To delete a label from the Labels folder:

1. Select

Home > Setup > File Manager

2. Open the controller's

Label

folder.

3. Select the tick box next to the label to be deleted.

4. Select the

Delete

icon.

End of procedure.

Import Image

Notes

.jpeg, .png and .bmp image files are supported.

2. Ensure the image file's pixel height is smaller than the print group's label

height.

OPERATION

EPT053091 - Issue 5 - 07 May 2021

170

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands