Domino Gx-OEM Product Manual Download Page 143

Page: 143 / 198

Add Text Element

To add a text element into a label design:

1. In the label creator's side menu select the

Element

tab.

2. Select the

Add

menu.

3. Select

Text

4. Enter the required text using the on screen keyboard.

Note

The keyboard type and language can be changed by selecting the

appropriate icon at the bottom of the text entry screen.

5. Select the green

Tick

icon to add the text element to the label design.

6. In the label design area, select the text element.
7. In the label creator's side menu select the

Element

tab.

8. Select the

Edit

menu.

9. The settings described in the table below can now be defined:

Setting Name

Explanation

Name

Edit the name of the element.

Horizontal position (mm)

Set the element's horizontal location in the label.

Vertical position (mm)

Set the element's vertical location in the label.

Font

Select the font type.

Maximised font rendering

Choose how the font size/height will be set:

•

Enabled = Set the font size by "Height (mm)".

•

Not enabled = Set the font size by "Font size (pt)".

Height (mm)

Note

This setting is only visible if "Maximised font

rendering" is enabled.

Set the font height in mm.

Font size (pt)

Note

This setting is only visible if "Maximised font

rendering" is not enabled.

Select the font size in pt.

Inter-character gap (mm)

Adjust the space between each character.

Text width reduce (%)

Adjust the width of the text element.

Bold

Enable/disable bold characters.

Alignment

Align the element to the left, centre or right of the label.

Rotation

Rotate the element by 0°, 90°, 180° or 270°.

Chimney-Tower print

Arrange the characters so they are stacked one below the other.

OPERATION

EPT053091 - Issue 5 - 07 May 2021

138

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands