Domino C1000 plus, Operation And Maintenance Manual, Page: 100 / 170

FORMATTING MESSAGES
100 77144 Issue 8 August 2009
SAVING A MESSAGE
When a message has been completed, it must be saved and given a name, as
follows:
(1) When the message is complete, press the
enter
key .
(2) A screen similar to this will be displayed.
Enter the required message name, up to eight
characters.
Note: As the default test message is named “Test”, it
is not possible to use this name.
(3) If an existing message is being edited the
option of renaming the message will be given.
(4) Once the message name has been entered,
press
enter
to confirm.
At any point during message creation, or editing,
the operator may escape back to the main menu bar
by pressing the
escape key.
Note: If the enter key is used, the new or
changed message will not be saved.
The adjacent confirmation screen will be shown to
prevent accidental loss of information.
D O M I N
C - S E R I
BLANK MESSAGE
1.
2.
3.
4.
ABC
A
A 30 31 1
TYPE NAME
TYPE NAME
MESSAGE
ALL CHANGES TO
MESSAGE WILL BE
LOST
PRESS
↵
TO CONFIRM
OR ESC TO RESUME
E
SC