Domino C Series, Operation And Maintenance Manual

Page: 68 / 92

FORMATTING MESSAGES
68 77091 Issue 2 November 2003
Slashed and Non-Slashed Zeros
The printer can print zeros either with a slash (Ø) or without (0). This is set for all
messages at once. The slash will appear on the screen during message editing but
will print correctly.
Choose which the printer will use by pressing together the keys labelled:
Repeated pressing of this key combination “toggles” slashed zero printing on and
off. No confirmation message will appear - do a test print to check that zeros are
printing correctly.
Bold
All or part of any message can be printed in bold text. (Unless specified, messages
always print in normal text.) Bold text produces thicker letters (as shown below).
To print in bold, enclose the relevant part of the message in the curly brackets
which can be accessed by holding down
and pressing:
Any text inside these non-printing brackets will be printed in bold; any text
outside these brackets will be printed in normal. For example:
+
Normal 7x5 Text
Bold 7x5 Text
or
This will print normal
{This will print bold}