Dometic RH418NTE, Installation And Operating Manual

Page: 15 / 224

EN
RH418NTE, RH418NTEG Installation
15
4.2 Remote control
5 Installation
!
!
!
The cooling device is designed for free-standing installation, but can be built-in if the
following conditions are complied with to ensure satisfactory operation and maxi-
mum cooling efficiency.
• The cooling device must be levelled carefully to ensure proper function.
• For the glass door version: When the ambient humidity is above 65 % at 25 °C
ambient temperature, moisture will condense on the door.
• The socket outlet for the mains connection must be freely accessible.
5.1 Changing the decorative plate
➤
Change the decorative plate as shown (fig.
3
, page 4 to fig.
6
, page 4).
No. in
fig.
2
, page 3
Description
1 Red button: Resets the door control monitor
2 Black button: Low inside temperature (two different levels possible)
3 Yellow button: High inside temperature
4 Blue button: Medium inside temperature
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
NOTICE! Risk of damage
Do not use extension cords or ungrounded (two prong) adapters.
DometicRH418NTE-RH418NTEG_IOM_4445102869_EMEA16_202x-xx-xx.book Seite 15 Dienstag, 2. Februar 2021 6:43 18