28
EN
Control Parameters
30
System Menu Screen - Sleep Mode Settings Submenu 2
The available sleep mode settings are below. Select
system menu > sleep mode settings Press the save icon
after completing the desired modification.
1 Sleep Mode Display .
Select what to show after the
sleep mode delay ends (standard logo, custom logo,
custom text, or blank screen backlight off or on).
2 Sleep Mode Delay .
Select either Off, or 0 to 600
seconds of delay to show the sleep mode display. If
Off is selected, the display will enter sleep mode.
3 Sleep Mode Text Edit .
Allows for editing of the
display text when the screen is in sleep mode.
Edit the text using arrow icons to select each
character. Character choices are: “ABCDEFGHIJKL
MNOPQRSTUVWXYZ0123456789 &’*@:,°=!-
()%.+#?/”. The total number of characters that will
fit on the screen is a function of the font size, with an
absolute maximum of 25.
31
System Menu Screen - Sleep Mode Setting - Text Color Submenu
4 Sleep Mode Text Color .
Select from 126 different
text colors to display during sleep mode.
32
System Menu Screen - Sleep Mode Setting - Custom Logo
5 Download Custom Logo .
This option is only
available if the Smart Touch Cabin Control detects
that a special programming cable is plugged into its
8-pin jack (i.e. it is not plugged into a control board).
Otherwise, the option is grayed out. There is a PC
program called the “Smart Touch Downloader”
that enables selection of a 24-bit bitmap file (BMP)
and transmission to the Smart Touch Cabin Control.
Instructions for this program are provided separately.
9 .7 .2 Display Lock Submenus
This section describes the display lock submenu screens
and settings to customize the display’s security access.
33
System Menu - Display Lock Submenu
–
Set Access Locked by Pin .
Sets a security PIN to
access the display based on the levels configured.
Press the icon to enter the configured PIN. Once
the PIN is entered, access is available to all levels.
Summary of Contents for MCS-CTRL
Page 42: ...42 EN Smart Touch Cabin Control...