EN
Heki 2 deluxe
Installing the Heki 2 de Luxe
17
7
Installing the Heki 2 de Luxe
!
WARNING! Beware of injury
Disconnect the vehicle power supply before you begin and make
sure it cannot be restarted.
A
NOTICE!
Make sure that you do not damage any cables during installation.
See fig.
4
If you would like to connect the lighting:
➤
Lay the power supply line (
1
) in the middle on one of the two long sides.
The connection is designed for an insulated flat plug which is 4.8 mm
wide and 0.8 mm thick.
The scope of delivery includes a mounting frame, which is suitable for roof
thicknesses of 25 – 32 mm. For roof thicknesses of 33 – 60 mm, you need to
have a suitable mounting set (see table).
➤
Measure your roof thickness W.
➤
Choose a suitable mounting set:
See fig.
5
➤
Check that the roof light has sufficient space around it (approx. 1 to 2 mm)
in the roof opening.
See fig.
6
➤
Clean the roof opening in the mounting area.
Roof thickness
Mounting
bracket colour
Screws
Item no.
25 – 32 mm
Grey
∅
4 x 25 mm
Included in the
scope of delivery
33 – 39 mm
Black
∅
4 x 32 mm
9104100245
39 – 46 mm
Yellow
∅
4 x 40 mm
9104100246
46 – 53 mm
Blue
∅
4 x 46 mm
9104100247
53 – 60 mm
Red
∅
4 x 52 mm
9104100248
