EN
D E15F, DE24F, EA15F, EA24B, EA24D, EA24F
Troubleshooting
35
11
Troubleshooting
Fault
Possible cause
Remedy
The device does not
work.
The device is not connected to a
power supply.
➤
Connect the device, see
chapter “Connecting the
device to the power supply”
on page 29.
The device is switched off.
➤
Switch the device on, see
chapter “Switching the
device on/off” on page 32.
The circuit breaker tripped.
➤
Switch on the circuit breaker.
The fuse has blown.
➤
Replace the fuse.
The device is not
cold enough.
The temperature is not set prop-
erly.
➤
Check the set temperature.
The ambient temperature could
require a higher temperature set-
ting.
➤
Set a higher temperature (see
chapter “Setting the tempera-
ture” on page 32).
The door was opened frequently.
➤
Do not open the door more
often than necessary.
The door was not closed prop-
erly.
➤
Close door properly.
The door is not hermetically
sealed.
➤
Check the door seal and clean
it.
➤
If necessary, contact an autho-
rized service agent to replace
the seal.
The condenser is too dirty.
➤
Clean the condenser.
The ventilation opening is
blocked.
➤
Clean the ventilation open-
ings.
DometicD15F-24F_E15F-24B-24D-24F_IOM_4445103817_AMER3_202x-xx-xx.book Page 35 Wednesday, December 7, 2022 9:56 AM
