EN
Using the parking cooler
CoolAir SP950
18
7.6
Switching off the parking cooler
You can switch the parking cooler to standby mode or switch it off completely. Note
that the parking cooler consumes power in standby mode. Therefore, switch off the
SP 950
parking cooler with
SP950I
rear panel evaporator unit whenever possible.
Due to the design, the condensation must be pumped off from the
SP950
parking
cooler with
SP950T
roof evaporator unit. Therefore, switch the
SP950
parking
cooler with
SP950T
roof evaporator unit to standby mode after use and any
subsequent journey while in motion. The condensation which accumulated during
and after operation is then drained off.
Switch off the parking cooler completely when it is not in use and for longer periods
(e. g. over the weekend).
I
➤
Switching to standby mode:
With the unit switched on, briefly press the
button or the
button on the
remote control.
✓
The digital display goes out, only the blue power LED lights up.
✓
The compressor and the fan switch off.
➤
Switching the unit off completely:
With the unit switched on, press the
button for 3 seconds.
✓
The LEDs and digital display go out.
✓
The fan and the compressor switch off.
NOTE
You can only use the remote control to switch the parking cooler in and
out of standby mode.
SP950-O-16s.book Seite 18 Freitag, 24. Februar 2017 4:26 16