Dometic CAM360AHD, Installation Manual

Page: 16 / 412

EN
Safety and installation instructions CAM360 AHD
16
I
2 Safety and installation instructions
Please observe the safety instructions and stipulations issued by the vehicle manufac-
turer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical influences and incorrect
connection voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
• Inadequate supply cable connections could result in short circuits,
causing:
–
Cable fires
– The airbag being triggered
– Damage to electronic control equipment
– Electrical malfunctions (indicators, brake light, horn, ignition,
lights)
A
NOTICE! Damage hazard
• To prevent the risk of short circuits, always disconnect the negative
terminal of the vehicle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should
also be disconnected.
NOTE
Supplementary information for operating the product.
CAM3601_INM_EMEA16.book Seite 16 Montag, 20. April 2020 8:45 08