Dometic 9600001404, Operating Manual

Page: 18 / 308

EN
Operation CF 35, CF40, CF50
18
➤
Press the “ON/OFF” button (fig.
3
1, page 3) for between one and two
seconds.
✔
The “POWER” LED lights up.
✔
The display (fig.
3
5, page 3) switches on and shows the current cooling
temperature.
I
✔
The cooler starts cooling the interior.
I
Locking the cooler (CF35, CF40)
➤
Close the lid.
➤
Press the lock (fig.
2
1, page 3) down, until it latches in place audibly.
6.6 Setting the temperature
➤
Press the “SET” button (fig.
3
4, page 3) once.
➤
Use the “UP +” (fig.
3
6, page 3) and “DOWN –” (fig.
3
7, page 3) buttons to
select the cooling temperature.
✔
The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
6.7 Switching off the cooler
➤
Empty the cooler.
➤
Switch the cooler off.
➤
Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤
Leave the cover slightly open. This prevents odour build-up.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED “POWER” flashes orange.
DometicCF35-CF50_OPM4445101783_EMEA16_202x-xx-xx.book Seite 18 Freitag, 18. Dezember 2020 5:37 17