background image

AWNINGS

Form No.: 3317228.000_B  5/19  |  ©2019 Dometic Corporation

EN

RGB LED Controller & RF Wireless Remote

Installation and Operation Instructions . . . . . .1

1  Features

•  22 Dynamic Modes

•  Card Type RF Remote

•  20 Static Colors

•  Ultra Slim Design

•  Very Smooth Effects

•  Dynamic Demo Mode

•  Adjustable Speeds

•  Easy Remote Pairing

•  Adjustable Brightness

•  Direct Color Select

2  Installation

This section provides the installation information for the RGB LED.

2.1  Power Supply

This unit accepts 11 VDC to 14 VDC power supply. The DC 
plug’s inner pole (or red cable) is positive and sleeve (or black 
cable) is negative.

2.2  LED Output

This unit supports common anode connection LED products. 
The peak output current is 6 A and maximum rated current 
is 3 A per channel. Please reduce the load if the main unit is 
overheating.

NOTICE: 

Do not short circuit or overload the outputs, this 

may lead to permanent damage.

3  Operation

This section provides the information for the operation of the 
remote controller and the RGB LED.

3.1  Using the Remote Controller

Remove the battery insulation tape before using. The RF 
Wireless remote signal can pass through barriers, and it is not 
necessary to aim at the main unit during operation. Do not 
install the main unit in closed metal areas.

3.2  Pairing a New Remote

The remote and main unit is not paired as default. The main 
unit can be paired to any remote controller and each remote 
controller can be paired to any main unit. To pair a new remote 
controller:
1.  Turn the power off to the main unit. Wait 10 seconds. Turn 

the power to the main unit on.

2.  Press the COLOR – and BRIGHT – keys together within 10 

seconds after returning power to the main unit. Hold the 

buttons down until the LED light flashes briefly. Pairing is 

now complete.

After this operation, the main unit will recognize the new 
remote controller

3.3  Cold Weather Use

In temperatures below 50°F (10°C), there may be a 
discoloration of the white light. The light will return to normal 
when the temperature increases.

FCC ID: 2AUML-RF17

Reviews: