Page
6
of
8
•
To obtain an even golden brown result, you can slightly butter the side of the
bread which will be in contact with the plate.
•
Lay the slices of bread with the buttered side on the lower cooking plate
•
Place your filling and cover with the second slices of bread with buttered side
up.
Note
: You can toast only one sandwich if you wish. For optimal result,
fillings should be placed well within the middle of the sandwich slices.
•
Lower the upper cooking plate carefully onto the bread until the sandwich
maker is tightly clamped then lock in place with the handle clip
•
After 2 - 3 minutes, open the sandwich maker and check whether the toasted
sandwich is sufficiently ‘brown’.
Note
: The cooking time required to obtain crisp brown sandwiches depends
on the type of bread, fillings and your personal taste.
•
When the sandwich is ready, open the lid and carefully remove with the help
of a wooden spatula. Always use heat-resistant plastic utensils or wooden
utensils. Do not use metal utensils which may damage the anti-stick surface
of the plates.
•
If making more sandwiches, close the lid to preserve the heat until ready to
toast the next sandwiches, otherwise, remove the plug from the wall socket
and allow to cool down before cleaning and storing.
Note
: During cooking, the Green “Ready to cook” indicator light cycles on
and off indicating the appliance is maintaining the correct temperature.
This appliance has a carrying handle at the front to facilitate comfortable
transport. Do Not Carry by the cord.
The grill may generate steam from between the grill plates while cooking and
when the top plate is opened. Take care to prevent injury.
4 Care Of Your Product
•
After use and before cleaning, remove the plug and wait for the appliance to cool.
•
Wipe the inside and edges of the heating plates with absorbent paper towel or a
soft cloth.
•
Should any filling be difficult to remove, pour a little cooking oil onto the heating
plate and re-heat for 1-2 minutes. Turn the power off and wipe off after 5 minutes
when the oil has cooled enough to prevent injury and the filling has softened.
