Assembling the device
42
Setting DIP switches on the devices
ATTENTION!
Functional problems by actuating the DIP switches with
voltage applied.
Only actuate the DIP switches on the device in a dead-
voltage state.
Make sure that DIP switches (1) 1 and 2 on the control unit and the passive
reader are in the ON position.
Schematic diagram of ENiQ Module Reader/Module Reader Terminal
When installing the “Access Manager Compact” variant and the RF Net
Manager, next connect the Access Manager Compact or RF Net Manager
to the network. Follow the instructions from page 48 for this purpose.
When installing the “Access Manager HiSec” variant, next connect the
devices to each other. Follow the instructions from page 43 for this purpose.
