Configurable safety system SAFEMASTER PRO - Fieldbus module
4
0265998 / 16.05.19 de / 101A
ABBREVIATIONS AND SYMBOLS
LL0, LL1 =
Logic level 0, logic level 1
OSSD
=
Output Signal Switching Device: Solid state safety output
MTTF
d
=
Mean Time to dangerous Failure
PL
=
Performance Level
PFH
d
=
Probability of a dangerous Failure per Hour
SIL
=
Safety Integrity Level
SILCL
=
Safety Integrity Level Claim Limit
SW
= Software
FW
= Firmware
APPLICABLE STANDARDS
SAFEMASTER PRO complies with the following European Directives:
• 2006/42/EC „Machinery Directive“
• 2014/30/EU „Electromagnetic Compatibility Directive“
• 2014/35/EU
„Low Voltage Directive“
• 2011/65/EU
„RoHS Directive
and is built to the following standards
DIN EN 61131-2
Programmable controllers –
Part 2: Equipment requirements and tests
DIN EN ISO 13849-1 Safety of machinery – Safety related parts of control systems –
Part 1: General principles for design
DIN EN 61496-1
Safety of machinery – Electro-sensitive protective equipment –
Part 1: General requirements and tests
DIN EN 61508-1
Functional safety of
electrical/electronic/programmable electronic safety-related systems –
Part 1: General requirements
DIN EN 61508-2
Functional safety of
electrical/electronic/programmable electronic safety-related systems –
Part 2: Requirements for
electrical/electronic/programmable electronic safety-related systems
DIN EN 61508-3
Functional safety of
electrical/electronic/programmable electronic safety-related systems –
Part 3: Software requirements
DIN EN 61508-4
Functional safety of
electrical/electronic/programmable electronic safety-related systems –
Part 4: Definitions and abbreviations
DIN EN 61784-3
Industrial communication networks – Profiles
Part 3: Functional safety fieldbuses –
General rules and profile definitions
DIN EN 62061
Safety of machinery –
Functional safety of safety-related electrical, electronic
and programmable electronic control systems
EN 81-20
Safety rules for the construction and installation of lifts –
Lifts for the transport of persons and goods –
Part 20: Passenger and goods passenger lifts
EN 81-50
Safety rules for the construction and installation of lifts –
Examinations and tests –
Part 50: Design rules, calculations, examinations and tests of lift components
