Configurable safety system SAFEMASTER PRO - Fieldbus module
29
0265998 / 16.05.19 de / 101A
Nominal voltage:
24 V DC
±
20 % / Remote Class III Source
or limited voltage limited current
Nominal consumption:
Max. 3 W
Connection to SAFEMASTER PRO:
Via 5-pole IN-RAIL-BUS
Connection to PC:
USB 2.0 (Hi Speed) – front connector USB
Max. cable length: 3 m
Connection to Fieldbus:
Via 2. front connector
Abnehmbare Klemmenblöcke mit Schraubklemmen
Anschluss Querschnitt:
1 x 0.25 ... 2.5 mm
2
solid or
stranded ferruled (isolated) or
2 x 0.25 ... 1 mm
2
solid or
stranded ferruled (isolated) or
Insulation of wires or sleeve length:
7 mm
Wire fixing:
Captive slotted screw M3
Fixing torque:
0.5 ... 0.6 Nm
Max. connection length:
100 m
Operating temperature:
- 10 ÷ 55 °C
Storage temperature:
- 20 ÷ 85 °C
Relative air humidity:
10 % ÷ 95 %
Altitude:
2000 m
Enclosure:
Electronic housing max. 4 terminals, DIN-Rail mounting
Enclosure material:
Polyamide
Enclosure protection class:
IP 40
Terminal blocks protection class:
IP 20
Fastening:
Quick fixing to rail according to EN 60715
Dimensions (H x W x D):
109 x 22.5 x 120.3
Weight:
150 g
UL-Data:
The safety functions were not evaluated by UL.
Listing is accomplished according to requirements of Standard UL 508,
“general use applications”
UL-Note:
For use in Pollution degree 2,
overvoltage category II environment only
Max surrounding air temperature:
55 °C
Wire connection:
60 °C / 75 °C copper conductors only
AWG 30 ÷ 12 (solid/stranded) Torque 5-7 lb-in
TECHNICAL DATA
