Dolby Laboratories Lake LP4D12, Manual

Page: 44 / 68

Dolby
®
Lake
®
Processor System Manual Front-Panel Interface
32
4.6.1 Lake Contour Front-Panel Functions
Table 4-1 Lake Contour Front-Panel Functions
Function Action
[Button]
Effect in Processor Effect in Controller
Select Processor Press [SEL] No effect. The text on the module icon is
highlighted yellow in the work
area, and the module scroll bar in
the Modules menu locates the
selected processor.
Display Module
Names Press+hold
[SEL] The module name and
base configuration scroll
across the front panel of
the processor. The text on the module icon is
highlighted yellow in the work
area, and the module scroll bar in
the Modules
menu locates the
selected processor.
Display Channel
Name Press+hold
[SEL] then
press+hold
Input or Output
Mute button The selected input/output
channel name as defined
in the Controller will
scroll across the front
panel of the processor. The text on the module icon is
highlighted yellow in the work
area, and the module scroll bar in
the Modules
menu locates the
selected processor.
Display Current
Firmware
Version Press+hold
[SEL] then
press+hold
[A]+[B]
together Firmware versions will
scroll across the front
panel of the processor. The text on the module icon is
highlighted yellow in the work
area, and the module scroll bar in
the Modules menu locates the
selected processor.
Factory Reset
(Partial) Press+hold
[1]+[4] while
turning on
processor All data with the
exception of frame/system
presets and IP address are
reset to the factory default
state. If the frame is in the work area, a
re-sync will occur and the modules
will show as out of sync.
Factory Reset
(Full) Press+hold
[1]+[5] while
turning on
processor All data is reset to a
factory default state. If the frame is in the work area, a
re-sync will occur and the modules
will show as out of sync.
Enter and Exit
Preset Mode Press+hold
[SEL] then
press+hold
[1]+[6] together The characters
PRST
appear on the front panel.
While in this mode, all
buttons function
differently.
If a different preset is recalled, the
Controller will re-sync, resulting in
out-of-sync modules if the selected
frame is in the work area.