When you hover your mouse on any of the icons, the following information appears: channel
name, position, array (if assigned to an array), routing, speaker data (if populated), and bass
management assignment (indicating the speaker that is carrying the low frequency
information) if bass management is applied.
Figure 78: Routing configuration summary
15.12 Array delays configuration summary
In the
Array Delays
tab of the
Cinema Audio
window, you can view the summary of the array
delays configuration.
The
Surround speaker array delays
screen appears. When used, the Dolby Atmos Designer
software automatically creates the surround delay values. If you are manually configuring the
EQ without the use of Dolby Atmos Designer, you need to put in surround-array delays
manually.
If you place a check mark in the
Use configuration file values
box, the system uses the
automatic EQ values. When this box is not checked, you can enter the desired delay values and
then click
Apply
.
Dolby IMS3000 audio overview
Dolby IMS3000 User
ʼ
s Manual
10 December 2018 IMS.OM.005280.DRM Issue 4
85
