Dolby Laboratories IMS3000 User Manual Download Page 62

Page: 62 / 134

Figure 48: Ingest monitor window

10.3 Uploading content to the Dolby IMS3000

You can upload content to the Dolby IMS3000 using the upload function.

About this task

You need SuperUser privileges to complete the operations described in this chapter. The upload
feature allows you to ingest KDMs and licenses, and update bundle files to the Dolby IMS3000.

Procedure

1. Click

Ingest

2. Click

Upload

3. Click

Choose Files

4. Select the file you want to upload.

5. Click

Upload

Figure 49: Uploading content

If the file was uploaded successfully, this message appears:

Files uploaded successfully

6. Click

Ingest Monitor

to view the progress of the ingest.

10.4 Using quick ingest

You can use the

Quick Ingest

feature to play directly from the content source drive.

Prerequisites

•

The content drive must be USB 3 or eSATA compatible.

•

The cable used to connect the content drive and the Dolby IMS3000 must be eSATA or USB 3
compatible.

Ingesting content into the Dolby IMS3000

Dolby IMS3000 User

s Manual

10 December 2018 IMS.OM.005280.DRM Issue 4

Summary of Contents for IMS3000







































































































































Search results

Summary of Contents for IMS3000

Reviews:

Related manuals for IMS3000

Brands by name

Popular brands

Dolby Laboratories IMS3000, User Manual

Search results

Summary of Contents for IMS3000

Reviews:

Related manuals for IMS3000

Brands by name

Popular brands