About this task
Depending on the 802.1X configuration, you may need to accept the authentication server
certificate. The setup wizard guides you through the process and detects many of the settings
for you, including your virtual LAN (VLAN) and IP network settings. In this figure, the Dolby
Conference Phone has detected those settings on initial setup.
If you see this screen, you can configure some 802.1X options directly in the wizard.
You can also upload certificates to the Dolby Conference Phone using the phone web interface.
Note:
If you use a self-signed authentication certificate, or a certificate authority that is not
in the default Dolby Conference Phone trusted certificate authority list, we recommend that
you use local setup with the Dolby Conferencing Console for 802.1X. The Dolby
Conferencing Console makes it easier to distribute the certificate. For more information,
see
802.1X deployment with Dolby Conferencing Console
.
Procedure
1. If a -based authentication method is selected by the authentication server, you are
prompted to review the server certificate information.
2. Enter the user name and password when the server requires credentials for authentication.
Depending on the authentication server configuration, you may be prompted to enter
authentication credentials before you accept the server certificate.
2.3 Opening the phone web interface
Enter the phone IP address in your web browser to open the phone web interface.
Configuration procedures
Dolby Conference Phone version 4.1 Configuration Guide for iMeet
5 October 2018
11
