24
11. Using the Test Light
1. Turn on the receiver by pressing the on/off button.
The indicator light will come on for a moment then
blink once every 4 seconds, showing that the receiver
is ready to use (the receiver needs to be charged if
the indicator light is red).
2. Turn the transmitter on by pressing the on/off button
on the right side of the transmitter until the OLED
screen illuminates. The LED will blink every 4 seconds
and the OLED screen will show the remaining battery
life (the transmitter needs to be charged if there is
only 1 bar showing on the battery icon for the OLED
transmitter screen).
3. Place the test light, included in the package contents,
on the contact points as shown in the diagram.
