Dodge HORNET 2023 Owner'S Manual Download Page 52

Page: 52 / 288

GETTING TO KNOW YOUR VEHICLE

Winter Operation

To ensure the best possible heater and defroster

performance, make sure the engine cooling system is

functioning properly and the proper amount, type, and

concentration of coolant is used. Use of the Air

Recirculation mode during Winter months is not

recommended, because it may cause window fogging.

Vacation/Storage

For information on maintaining the Climate Control system

when the vehicle is being stored for an extended period of

time, see

page 261.

Window Fogging

Vehicle windows tend to fog on the inside in mild, rainy,

and/or humid weather. To clear the windows, select

Defrost or Mix mode and increase the front blower speed.

Do not use the Recirculation mode without A/C for long

periods, as fogging may occur.

Outside Air Intake

Make sure the air intake, located directly in front of the

windshield, is free of obstructions, such as leaves. Leaves

collected in the air intake may reduce airflow, and if they

enter the air distribution box, they could plug the water

drains. In Winter months, make sure the air intake is clear

of ice, slush, and snow.

Cabin Air Filter

The Climate Control system filters out dust and pollen

from the air. Contact an authorized dealer to service your

cabin air filter, and to have it replaced when needed.

Operating Tips Chart

INTERIOR STORAGE AND EQUIPMENT

TORAGE

Glove Compartment

The glove compartment is located on the passenger side

of the instrument panel.

Glove Compartment

To open the glove compartment, pull the release handle.

WEATHER

CONTROL SETTINGS

Hot Weather And Vehicle

Interior Is Very Hot

Set the mode control to

(Panel Mode),

(MAX A/C) on, and

blower on high. Roll down

the windows for a minute

to flush out the hot air.

Adjust the controls as

needed to achieve

comfort.

Warm Weather

Turn

(A/C) on and set

the mode control to

(Panel Mode).

Cool Sunny

Operate in

(Bi-Level

Mode).

Cool & Humid Conditions

Set the mode control to

(Mix Mode) and turn

(A/C) on to keep

windows clear.

Cold Weather

Set the mode control to

(Floor Mode). If

windshield fogging starts

to occur, move the control

(Mix Mode).

WARNING!

Do not operate this vehicle with a glove compartment in

the open position. Driving with the glove compartment

open may result in injury in a collision.

23_GG_OM_EN_USC_t.book Page 50

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands