Dodge HORNET 2023 Owner'S Manual Download Page 209

Page: 209 / 288

IN CASE OF EMERGENCY

207

5. Block both the front and rear of the wheel diagonally

opposite of the jacking position. For example, if the

driver’s front wheel is being changed, block the

passenger’s rear wheel.

Wheel Blocked Example

NOTE:

Passengers should not remain in the vehicle when the

vehicle is being lifted or raised.

ACK

OOLS

OCATION

PARE

IRE

TOWAGE

— I

QUIPPED

If equipped, the jack, tools and spare tire are located

under the load floor in the rear cargo compartment.

Jack, Tools And Spare Tire Location

To access the jack, tools and spare tire proceed as follows:
1. Open the liftgate.
2. Locate and lift up on the load floor handle.

Load Floor Handle

Spare Tire

3. Remove the fastener securing the spare tire by

turning it counterclockwise.

Spare Tire Fastener

4. Pull upward to remove the jack and tools tray to gain

access to the spare tire.

23_GG_OM_EN_USC_t.book Page 207

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands