Dodge HORNET 2023 Owner'S Manual Download Page 190

Page: 190 / 288

188

SAFETY

HILD

ESTRAINTS

Everyone in your vehicle needs to be buckled up at all

times, including babies and children. Every state in the

United States, and every Canadian province, requires that

small children ride in proper restraint systems. This is the

law, and you can be prosecuted for ignoring it.
Children 12 years or younger should ride properly buckled

up in a rear seat, if available. According to crash statistics,

children are safer when properly restrained in the rear

seats rather than in the front.

There are different sizes and types of restraints for

children from newborn size to the child almost large

enough for an adult safety belt. Always check the child

seat Owner’s Manual to make sure you have the correct

seat for your child. Carefully read and follow all the

instructions and warnings in the child restraint

Owner’s Manual and on all the labels attached to the

child restraint.
Before buying any restraint system, make sure that it has

a label certifying that it meets all applicable Safety

Standards. You should also make sure that you can install

it in the vehicle where you will use it.

NOTE:



For additional information, refer to http://

www.nhtsa.gov/parents-and-caregivers or call:

1–888–327–4236



Canadian residents should refer to Transport Canada’s

website for additional information: https://

www.tc.gc.ca/en/services/road/

child-car-seat-safety.html

WARNING!

In a collision, an unrestrained child can become a

projectile inside the vehicle. The force required to hold

even an infant on your lap could become so great that

you could not hold the child, no matter how strong you

are. The child and others could be badly injured or

killed. Any child riding in your vehicle should be in a

proper restraint for the child’s size.

23_GG_OM_EN_USC_t.book Page 188

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands