Dodge HORNET 2023 Owner'S Manual Download Page 127

Page: 127 / 288

STARTING AND OPERATING

125

Four-Pin Connector

Seven-Pin Connector

OWING

IPS

Before towing, practice turning, stopping, and backing up

the trailer in an area located away from heavy traffic.

Automatic Transmission

Select the DRIVE (D) range when towing. The transmission

controls include a drive strategy to avoid frequent shifting

when towing. For increased engine braking on steep

downhill grades, select the LOW range.

Cruise Control — If Equipped



Do not use on hilly terrain or with heavy loads.



When using the Cruise Control, if you experience speed

drops greater than 10 mph (16 km/h), disengage until

you can get back to cruising speed.



Use Cruise Control in flat terrain and with light loads to

maximize fuel efficiency.

1 — Ground
2 — Park
3 — Left Stop/Turn
4 — Right Stop/Turn

1 — Backup Lamps
2 — Running Lamps
3 — Left Stop/Turn
4 — Ground
5 — Battery
6 — Right Stop/Turn
7 — Electric Brakes

23_GG_OM_EN_USC_t.book Page 125

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands