Dodge Grand Caravan 2019, Owner'S Manual

Page: 141 / 490

NOTE: Keep magnetic materials away from the top of the
instrument panel, such as iPod’s, Mobile Phones, Laptops
and Radar Detectors. This is where the compass module is
located, and it can cause interference with the compass
sensor, and it may give false readings.
1. Turn the ignition switch ON.
2. Push and release the up or down arrow button until the
Setup (Customer-Programmable Features) menu is
reached, then push the
right arrow button.
3. Push and release the down arrow button until the
“Compass Variance” message is displayed in the instru-
ment cluster display, then press the
right arrow button.
The last variance zone number displays in the instru-
ment cluster display.
4. Push and release the right arrow button until the proper
variance zone is selected, according to the map.
5. Push and release the RETURN button to exit.
Turn Menu OFF
Select from Main Menu using the up or down arrow
button. Pushing the right arrow button clears the menu
display. Pushing any one of the four Display control
buttons will bring the menu back.
Customer-Programmable Features (System Setup)
Personal Settings allows you to set and recall features
when the transmission is in PARK. If the transmission is
out of PARK or the vehicle begins moving, a warning
message
SYSTEM SETUP NOT AVAILABLE VEHICLE
NOT IN PARK displays when you try to select “System
Setup” from the main menu.
Compass Variance Map
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 139