Dodge GRAND CARAVAN 2017, User Manual

Page: 60 / 204

Driver Memory Seat
The Memory Buttons (1) and (2) on the driver's door panel can be programmed to recall
the driver's seat, outside mirrors, and radio station preset settings. Your remote keyless
entry key fob can also be programmed to recall the same positions when the unlock button
is pushed.
Your vehicle may have been delivered with
two key fobs, one key fob can be linked to
each of the memory positions.
Programming The Memory Feature
To create a new memory profile, perform the following:
1. Cycle the vehicle’s ignition to the ON/RUN position (do not start the engine).
2. Adjust all memory profile settings to desired preferences (i.e., driver’s seat, outside
mirrors, and radio station presets).
3. Push and release the set (S) button on the memory switch.
4. Within five seconds, push and release either of the memory buttons (1) or (2). The
instrument cluster display will display which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK, but the vehicle must be in
PARK to recall a memory profile.
• To set a memory profile to your key fob, refer to “Linking And Unlinking The Remote
Keyless Entry Key Fob To Memory” in this section.
Driver Memory Switch
G E T T I N G S T A R T E D
58