manualshive.com logo in svg

Dodge DURANGO 2019, User Manual

The Dodge Durango 2019 user manual is an essential tool for any Durango owner. From detailed instructions to valuable insights, this comprehensive manual covers all aspects of your vehicle. Download it for free from our website manualshive.com, ensuring you have the necessary guidance to maximize your Durango experience.

Share
Download
background image

General Information

The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:

This device complies with Part 15 of the FCC
Rules and with Innovation, Science and Eco-
nomic Development Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:

1. This device may not cause harmful interfer-

ence, and

2. This device must accept any interference

received, including interference that may
cause undesired operation.

NOTE:

Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

INTERNAL EQUIPMENT

Electrical Power Outlets

Your vehicle is equipped with 12 Volt (13 Amp)
power outlets that can be used to power cellular
phones, small electronics and other low pow-
ered electrical accessories. The power outlets
are labeled with either a “key” or a “battery”
symbol to indicate how the outlet is powered.
Power outlets labeled with a “key” are powered
when the ignition switch is in the ON or ACC
position, while the outlets labeled with a “bat-
tery” are connected directly to the battery and
powered at all times.

NOTE:

• All accessories connected to the “battery”

powered outlets should be removed or turned
off when the vehicle is not in use to protect the
battery against discharge.

• Do not exceed the maximum power of

160 Watts (13 Amps) at 12 Volts. If the
160 Watt (13 Amp) power rating is exceeded
the fuse protecting the system needs to be
replaced.

• Power outlets are designed for accessory

plugs only. Do not insert any other object in
the power outlets as this will damage the
outlet and blow the fuse. Improper use of the
power outlet can cause damage not covered
by your New Vehicle Limited Warranty.

61

Summary of Contents for DURANGO 2019





























































































































































































































































































Reviews:

No comments

Related manuals for DURANGO 2019

JAC S5 Workshop Manual preview
S5
Brand: JAC Pages: 70
Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Brand: Eaton Pages: 65
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
RBP STEALTH POWER RBP-216-SP Installation Manual preview
STEALTH POWER RBP-216-SP
Brand: RBP Pages: 16
HURST STREET SUPER SHIFTER Installation Instructions preview
STREET SUPER SHIFTER
Brand: HURST Pages: 2
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
Lincoln NAUTILUS 2022 Owner'S Manual preview
NAUTILUS 2022
Brand: Lincoln Pages: 586
Mobileye C2-270 User Manual preview
C2-270
Brand: Mobileye Pages: 29
Volvo 30661683 Installation Instructions, Accessories preview
30661683
Brand: Volvo Pages: 18
ULTIMATE SPEED 1188 1525 Instructions For Use And Safety Manuallines preview
1188 1525
Brand: ULTIMATE SPEED Pages: 26
Westin Sportsman 40-0125 Installation Instructions preview
Sportsman 40-0125
Brand: Westin Pages: 2
ZeroRPM IMS2 Operator'S Manual preview
IMS2
Brand: ZeroRPM Pages: 41
Yakima RIpCord Manual preview
RIpCord
Brand: Yakima Pages: 12
Paser KIT052USSU12 Manual preview
KIT052USSU12
Brand: Paser Pages: 10

Brands by name

Popular brands

Load more brands