Dodge Challenger 2018 Owner'S Manual Download Page 404

Page: 404 / 512

1. Press the “Apps

” button to open the App screen.

2. Press and hold, then drag the selected App to replace an

existing shortcut in the main menu bar.

The new app shortcut, that was dragged down onto the

main menu bar, will now be an active App/shortcut.
NOTE:

This feature is only available if the vehicle is

stopped.

CYBERSECURITY

Your vehicle may be a connected vehicle and may be

equipped with both wired and wireless networks. These

networks allow your vehicle to send and receive informa-

tion. This information allows systems and features in your

vehicle to function properly.
Your vehicle may be equipped with certain security fea-

tures to reduce the risk of unauthorized and unlawful

access to vehicle systems and wireless communications.

Vehicle software technology continues to evolve over time

and FCA US LLC, working with its suppliers, evaluates

and takes appropriate steps as needed. Similar to a com-

puter or other devices, your vehicle may require software

updates to improve the usability and performance of your

systems or to reduce the potential risk of unauthorized and

unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your

vehicle systems may still exist, even if the most recent

version of vehicle software (such as Uconnect software) is

installed.

Uconnect 4C/4C NAV Main Menu

402 MULTIMEDIA

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands