Dodge Challenger 2018 Owner'S Manual Download Page 374 | Manualshive

Page: 374 / 512

background image

WARNING!

(Continued)

•

Never use a tire with a smaller load index or capacity,
other than what was originally equipped on your
vehicle. Using a tire with a smaller load index could
result in tire overloading and failure. You could lose
control and have a collision.

•

Failure to equip your vehicle with tires having ad-
equate speed capability can result in sudden tire
failure and loss of vehicle control.

CAUTION!

Replacing original tires with tires of a different size
may result in false speedometer and odometer read-
ings.

Tire Types

All Season Tires — If Equipped
All Season tires provide traction for all seasons (Spring,

Summer, Fall, and Winter). Traction levels may vary be-

tween different all season tires. All season tires can be

identified by the M+S, M&S, M/S or MS designation on the

tire sidewall. Use all season tires only in sets of four; failure

to do so may adversely affect the safety and handling of

your vehicle.
Summer Or Three Season Tires — If Equipped
Summer tires provide traction in both wet and dry condi-

tions, and are not intended to be driven in snow or on ice.

If your vehicle is equipped with Summer tires, be aware

these tires are not designed for Winter or cold driving

conditions. Install Winter tires on your vehicle when am-

bient temperatures are less than 40°F (5°C) or if roads are

covered with ice or snow. For more information, contact an

authorized dealer.
Summer tires do not contain the all season designation or

mountain/snowflake symbol on the tire sidewall. Use

Summer tires only in sets of four; failure to do so may

adversely affect the safety and handling of your vehicle.

WARNING!

Do not use Summer tires in snow/ice conditions. You
could lose vehicle control, resulting in severe injury or
death. Driving too fast for conditions also creates the
possibility of loss of vehicle control.

372 SERVICING AND MAINTENANCE

«
...
372
373
374
375
376
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: HALE Pages: 44

Brand: iDataLink Pages: 30

Brand: JASTEC Pages: 12

V2 SUPERCHARGER

Brand: Tesla Pages: 9

Brand: Chevrolet Pages: 356

Brand: Ford Pages: 272

Brand: Pontiac Pages: 376

Brand: Jeep Pages: 712

Brand: GMC Pages: 499

Brand: Kia Pages: 290

Brand: B-Speech Pages: 24

Brand: Chariot Carriers Pages: 3

Brand: Saab Pages: 3

Brand: Phonocar Pages: 2

Brand: BrandMotion Pages: 2

Brand: Meta System Pages: 16

Brand: Kia Pages: 11

Brand: Saab Pages: 426

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands