Dodge Avenger Owner'S Manual Download Page 314

Page: 314 / 514

The transmission shift lever has PARK, REVERSE, NEU-
TRAL, DRIVE, and AutoStick

威

shift positions. Manual

shifts can be made using the AutoStick

威

shift control

(refer to “AutoStick

威

” in “Starting And Operating” for

further information). Moving the shift lever to the left or
right (-/+) while in the AutoStick

威

position (below the

Drive position) will manually select the transmission
gear, and will display the current gear in the instrument
cluster as 6, 5, 4, 3, 2, 1.

Gear Ranges

DO NOT race the engine when shifting from PARK or
NEUTRAL into another gear range.

PARK

This range supplements the parking brake by locking the
transmission. The engine can be started in this range.

Shift Lever

312

STARTING AND OPERATING

Summary of Contents for Avenger



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands

Dodge Avenger, Owner'S Manual

Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands