Dodge Avenger Owner'S Manual Download Page 273

Page: 273 / 514

•

The audio device can be controlled using the radio
buttons to Play, Browse, and List the iPod

威

contents.

•

The audio device battery charges when plugged into
the USB/AUX connector (if supported by the specific
audio device)

Controlling The iPod

姞

Or External USB Device

Using Radio Buttons

To get into the iPod

威

/USB/MP3 control mode and access

a connected audio device, either press the “AUX” button
on the radio faceplate or press the VR button and say

⬙

USB

⬙

Switch to USB

⬙

. Once in the iPod

威

/USB/MP3

control mode, audio tracks (if available from audio
device) start playing over the vehicle’s audio system.

Play Mode

When switched to iPod

威

/USB/MP3 control mode, the

iPod

威

or external USB device automatically starts Play

mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod

威

or external

USB device and display data:

•

Use the TUNE control knob to select the next or
previous track.

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or press the
VR button and say

⬙

Next Track

⬙

•

Turning it counterclockwise (backward) by one
click, will jump to the previous track in the list or
press the VR button and say

⬙

Previous Track

⬙

•

Jump backward in the current track by pressing and
holding the <<

button. Holding the <<

button long enough will jump to the beginning of
the current track.

UNDERSTANDING YOUR INSTRUMENT PANEL

271

Summary of Contents for Avenger



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands

Dodge Avenger, Owner'S Manual

Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands