Dodge 2015 Journey Owner'S Manual Download Page 538

Page: 538 / 648

If you must use the accessories (wipers, defrosters, etc.)

while being towed, the ignition must be in the ON/RUN

position, not the ACC position.
If the key fob is unavailable, or the vehicle’s battery is

discharged, refer to “Shift Lever Override” in this section

for instructions on shifting the transmission out of PARK

for towing.

CAUTION!

•

Do not use sling type equipment when towing.

Vehicle damage may occur.

•

When securing the vehicle to a flat bed truck, do

not attach to front or rear suspension components.
Damage to your vehicle may result from improper
towing.

(Continued)

CAUTION!

(Continued)

•

Do not push or tow this vehicle with another
vehicle as damage to the bumper fascia and trans-
mission may result.

•

If the vehicle being towed requires steering, the
ignition switch must be in the ACC or ON/RUN
position, not in the LOCK/OFF position.

All-Wheel Drive (AWD) Models

The manufacturer requires towing with all four wheels

OFF the ground. Acceptable methods are to tow the

vehicle on a flatbed, or with one end of vehicle raised and

the opposite end on a towing dolly.

536 WHAT TO DO IN EMERGENCIES

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands