Dodge 2015 Journey Owner'S Manual Download Page 509

Page: 509 / 648

RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)
Towing This Vehicle Behind Another Vehicle

Towing Condition

Wheel OFF the Ground

FWD Models

AWD Models

Flat Tow

NONE

NOT ALLOWED

Dolly Tow

Front

NOT ALLOWED

Rear

NOT ALLOWED

On Trailer

ALL

Recreational Towing — Front-Wheel Drive (FWD)
Models

Recreational towing is allowed

ONLY

if the front wheels

are

OFF

the ground. This may be accomplished using a

tow dolly or vehicle trailer. If using a tow dolly, follow

this procedure:
1. Properly secure the dolly to the tow vehicle, following

the dolly manufacturer’s instructions.

2. Drive the front wheels onto the tow dolly.
3. Firmly apply the parking brake. Place the transmis-

sion in PARK.

4. Properly secure the front wheels to the dolly, following

the dolly manufacturer’s instructions.

5. Release the parking brake.

STARTING AND OPERATING 507

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands