Dodge 2015 Journey Owner'S Manual Download Page 203

Page: 203 / 648

Front Heated Seats — If Equipped

The front heated seats control buttons are located within

the Uconnect® system. You can gain access to the control

buttons through the climate screen or the controls screen.

•

Press the heated seat button

once to turn the High

setting ON.

•

Press the heated seat button

a second time to turn

the Low setting ON.

•

Press the heated seat button

a third time to turn

the heating elements OFF.

When the HI-level setting is selected, the heater will

provide a boosted heat level during the first four minutes

of operation. Then, the heat output will drop to the

normal HI-level. If the HI-level setting is selected, the

system will automatically switch to LO-level after ap-

proximately 60 minutes of continuous operation. At that

time, the display will change from HI to LO, indicating

the change. The LO-level setting will turn OFF automati-

cally after approximately 45 minutes.

NOTE:

The engine must be running for the heated seats

to operate.

Vehicles Equipped With Remote Start

On models that are equipped with remote start, the

heated seats can be programed to come on during a

remote start.
This feature can be programmed through the Uconnect®

system. Refer to “Uconnect® Settings” in “Understand-

ing Your Instrument Panel” for further information.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands