CONTROLS
LEVEL: Controls the output level of the FX102. Use this
control to overdrive the front end of the amplifiers, and add
a solo boost.
LOW: Controls the low frequency EQ of the FX102. Use
this control to make your amplifiers distortion sound thin or
very flubby.
HIGH: Controls the amount of high frequency EQ of the
FX102. Use this control to make your amplifier sound very
crisp, or to give those harmonics just that extra little kick
so your guitar oscillates on command.
DRIVE: This adds gain or distortion to the FX102. Turn it
up while using a distorted amp, and you can feel the notes
just keep going and going.........
FOOTSWITCH: Switches the effect in or out of the signal
path.
LED INDICATOR: Lights when the distortion is enabled,
and is not lit when the distortion is bypassed.
JACKS: Input, Output, AC Adapter (use the DOD PS200R
power supply only to eliminate the need for a 9 volt
battery).
