197
Data communication
To connect the terminal and Bluetooth
device, pair them first.
･
Once paired, the setting with the Bluetooth
device is saved.
･
For make pair setting, entering passcode (PIN)
may be required. Passcode (PIN) of the
terminal is "0000". If you cannot make pair
setting when you enter "0000", see the
documentation of your Bluetooth device.
･
Make sure that the Bluetooth function and
Bluetooth detection function of the target
device are on in advance.
1
From the Home screen,
u
[Settings]
u
[Bluetooth].
･
Detected Bluetooth devices are
displayed in "Available devices".
2
Tap a name of Bluetooth device for
pairing.
3
Confirm the Bluetooth pairing
code (pass code) on the
confirmation screen
u
[PAIR].
･
Paired Bluetooth devices are displayed
in "Paired devices".
■
When pairing request is sent from a
Bluetooth device
Confirm the Bluetooth pairing code (pass
code) on the confirmation screen and then
tap [PAIR].
❖
Information
･
To unpair, tap
for the Bluetooth device to be
unpaired
u
[FORGET].
1
From the Home screen,
u
[Settings]
u
[Bluetooth].
2
Tap a name of Bluetooth device to
connect.
❖
Information
･
To rename a Bluetooth device, tap
for Bluetooth
device you want to change the name
u
Enter a name
u
Tap [OK].
･
Up to 7 devices can be connected at the same time.
Depending on profile, operation may not be correct
or number of devices that can be connected at the
same time may be different.
Disconnecting a Bluetooth device
1
From the Home screen,
u
[Settings]
u
[Bluetooth].
2
Tap a name of connected
Bluetooth device.
Making pair setting for the
terminal and Bluetooth device
Connecting the terminal with a
Bluetooth device
Summary of Contents for xperia XZS SO-03J
Page 1: ...17 4 INSTRUCTION MANUAL...
