123
Apps
❖
Information
･
You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･
These services are available even when the terminal
is off. However, they may not be available if the
terminal has been off for a long time or the battery is
too low.
･
The Osaifu-Keitai compatible application performs
communication which is necessary for providing the
Osaifu-Keitai service in the background regardless of
the setting of "STAMINA mode" (P.176) or "Data saver"
(P.161), and the packet communication charge may
be incurred.
･
Depending on your installed Osaifu-Keitai
compatible application or its settings, your terminal
may not respond even when you hover it over an IC
card reader if the screen is locked or if the screen
backlight of the terminal is off.
･
After the power of the terminal is turned on or the
terminal is restarted, cancel the screen lock and then
hold over a reader to use the Osaif-Keitai service.
･
You can use Osaifu-Keitai compatible service even
when the PIN code for docomo nano UIM card
cannot be unlocked or PIN locked.
･
Note that when you do not subscribe to sp-mode,
some functions of Osaifu-Keitai compatible service
may not be available.
1
From the Home screen,
u
[Settings]
u
[More].
2
[NFC / Osaifu-Keitai settings]
u
Tap
for "Reader/Writer, P2P"
u
[OK].
･
NFC Reader/Writer, P2P function is
enabled, and
appears in the status
bar.
3
Hold the NFC / Osaifu-Keitai
position over a device with the
NFC module or a smart poster, etc.
Use "NFC / Osaifu-Keitai lock" settings to
restrict the use of Osaifu-Keitai function and
related services.
･
NFC / Osaifu-Keitai lock is different from
screen lock for the terminal, SIM card lock.
1
From the Home screen,
u
[Settings]
u
[More].
2
[NFC / Osaifu-Keitai settings]
u
[NFC / Osaifu-Keitai lock].
Using "
かざしてリンク対応サービ
ス
(Kazashite-Link compatible
service)"
Locking Osaifu-Keitai function
Summary of Contents for xperia XZS SO-03J
Page 1: ...17 4 INSTRUCTION MANUAL...
