Docomo STYLE N-01B, Instruction Manual, Page: 77 / 168

Mor
e c
on
venient
This FOMA terminal supports commercially available microSD cards of up to
2 GB and microSDHC cards of up to 16 GB (as of October, 2009).
・ Make sure to format microSD card on N-01B. You may not be able to use
microSD card formatted on another handset or PC.
・
Visit the following website for the latest information about supported
cards such as manufacturers or capacity. Note that microSD cards not
listed on the website may not be operated on the FOMA terminal.
- From i-mode
P p
s
"
メニューリスト
"
s
"
ケータイ電話メーカー
"
s
"
みんな
N
らんど
"
(Japanese)
- From QR code
Scan the QR code shown to the right, and then select
the displayed URL.
- From PC
http://www.n-keitai.com/
Note that information described on the website is only the result of the
operation check and does not guarantee all operations.
・
Turn off the power before installing or removing a microSD card.
・
Do not put a label or sticker on a microSD card.
・
Keep a backup copy of data stored in a microSD card. Please be aware
that DOCOMO is not responsible for any damages the subscriber may
incur due to the card data being deleted, erased, or altered.
Installing/Removing microSD Card
❷
Insert a microSD card into the microSD card
slot and push it until it locks into the place
Insert the microSD card straight and slowly with the
metal contacts side down. When fully inserted, the
card is locked in the place.
❸
Close the cap of the microSD card slot
When you turn on the power after inserting
the microSD card, appears.
❶
Open the cap of the microSD card slot
・
To remove the microSD card, push it in and release. The card pops up
slightly. Note that the card may fly out of the slot.
Grip the groove of the microSD card and slowly pull the card out.
Data Management
75