Docomo STYLE N-01B, Instruction Manual, Page: 121 / 168

13
d
For Windows 2000
1
Connect the FOMA USB Cable
with Charge Function 02
(optional) to the FOMA terminal
When the FOMA USB Cable with Charge
Function 02 has been connected to the PC in
Step 4 of "Connecting the FOMA terminal to
PC" (p.9), this screen is automatically
displayed.
2
Click "
次へ
" (Next)
3
Select " デバイスに最適なドライバを検索する（推奨） " (Search for the
optimal driver for the device (Recommended)) and click "
次へ
" (Next)
4
Check the " 場所を指定 " (Specify the search location) box and click " 次
へ
" (Next)
5
Specify the folder to search and click "OK"
The folder name is "<CD-ROM drive>:¥N-01B_USB_Driver_Vista32¥Win2k_XP".
The CD-ROM drive name differs depending on the PC.
6
Confirm the driver name and click "
次へ
" (Next)
In this case, the driver's name appears as "N-01B".
7
When the message " 新しいハードウェアの検索ウィザードの完了 "
(Complete the find new hardware wizard) appears, click "
完了
" (Finish)
8
Install other drivers
See Steps 1 to 7 and install all other 3 drivers (p.14). If the " 新しいハードウェアの検出ウィザード "
(Find new hardware wizard) screen does not appear after the completion of Step 7, installation of the
drivers is completed. Proceed to "Checking the installed driver" (p.14).