Before using the terminal
16
<About 1Seg antenna>
The terminal has a built in 1seg antenna, so that the
entire terminal acts as an antenna. For better signal
reception, cover the minimum parts of the terminal when
you watch 1seg with the terminal held.
The docomo nano UIM card is an IC card in which user
information such as your phone number etc. is saved.
･
You can use the terminal only with docomo nano UIM
card. If you have a mini UIM, UIM, FOMA card, bring it
to a docomo Shop to replace with docomo nano UIM
card.
･
When docomo nano UIM card is not attached correctly
or docomo nano UIM card is abnormal, some
functions such as making/receiving calls and sending/
receiving mails are not available.
･
For details on docomo nano UIM card, refer to the
docomo nano UIM card manual.
◆
Installing/Removing docomo nano
UIM card
･
To install/remove, turn the terminal OFF and hold the
terminal in your hand. If you do not hold the terminal
in your hand, the sub-display may be damaged.
･
Installing/Removing the back cover and the battery
pack.
･
Be sure to use the tray when inserting a docomo nano
UIM card. Failure to do so may cause a malfunction.
■
Attaching
a
Put your fingertip on the tab of the tray and pull it
straight out (
a
)
･
The tray is designed to be removed from the
docomo nano UIM card slot.
b
With the IC side facing up, place the docomo nano
UIM card on the tray (
b
)
･
Check the orientation of docomo nano UIM card
corner cut.
c
Insert the tray straight into the docomo nano UIM
card slot (
c
)
docomo nano UIM card
b
a
Notch
Tab
Tray
c
