Docomo PRIME series N-01A, Instruction Manual, Page: 69 / 602

67
Voice/Vi
deophone Calls/P
ushTalk
MSG display settings
……
Set the Chaku-moji
display setting for an incoming call with Chaku-moji.
Display all messages
Only number in PH-book
……
Display only
Chaku-moji messages from senders stored in
the phonebook.
Calls with Caller ID …… Display only Chaku-
moji messages from senders providing the
caller ID.
Hide all messages
3D message display …… Set whether to display
Chaku-moji in 3D animation.
Create message list screen
(p.66)
Edit
Delete …… Select Delete this/Delete selected/Delete all.
Making a call with a message
You can add Chaku-moji when making a voice or
videophone call from the “Enter phone number”
screen and the detail screen of the “Phonebook”,
“Redial”, “Dialed calls” or “Received calls”.
<Example: To make a call with Chaku-moji from the
enter phone number screen>
1
Enter phone number screen (p.58)
X
u
(FUNC)
X
“Chaku-moji”
X
Select any item:
Create message …… Enter Chaku-moji. Up to 10
characters can be entered.
Select message …… Select a stored Chaku-moji.
You can edit Chaku-moji by pressing
o
(Edit) on
the message selection screen.
Sent messages …… Select a previously sent
Chaku-moji. You can edit Chaku-moji by pressing
o
(Edit) on the sent message screen.
■
To delete the entered Chaku-moji (to make
a call without Chaku-moji)
X
u
(FUNC)
X
“Chaku-moji”
X
“Create
message”
X
Clear the entered text
2
r
(voice call),
o
(V.phone)
N
z
You cannot delete the pre-installed Chaku-moji.
Even when you change a pre-installed Chaku-moji
and delete the Chaku-moji, it is restored to default.
N
z
Charges apply to send Chaku-moji. Charges do
not apply to receive Chaku-moji.
z
You can store up to 30 Chaku-moji in Sent
messages (when 2in1 is active, up to 30 sent
messages in each mode, and in Dual mode, up to
30 in each mode and a total of up to 60 sent
messages are stored). When you send the same
Chaku-moji repeatedly, only the latest one is
recorded. When the number of entries exceeds
the maximum, older entries are overwritten.
z
If the receiver’s terminal is under the following
conditions, Chaku-moji cannot be sent. In this
case, no sending charges apply.
• The terminal does not support Chaku-moji
(“Transmission failed” appears)
• Chaku-moji does not appear on the receiver
display due to the “MSG display settings” on the
receiver terminal (“Transmission failed” appears)
• Public mode (Driving mode) is set
• The ringing time for Record message is set to 0
second
• “ ” is displayed or the power is off
z
Depending on the signal quality, the transmission
result may not appear on the sender terminal even
when the receiver terminal receives Chaku-moji.
In this case, sending charges apply.
z
You cannot send or receive Chaku-moji overseas.
When the other party’s terminal receives Chaku-
moji, “Transmission completed” appears.